RCK40-55x85 Challenge Cone Clamping Element 55x85mm Shields If the shaft cannot be

If the shaft cannot be used as a raceway

Reference speed: 30000 r/min

Set Screw Size: M8 x 1

Available from stock to suit british standard roller chains from 08B (1/2 inch pitch) to 20B (1

RCK40-55x85 Challenge Cone Clamping Element 55x85mm Shields If the shaft cannot beShaftlock Cone Clamping Elements Cone clamping elements are a purely friction method of clamping components to a shaft. The internal components within a cone clamp operate on a taper, so as the cone clamp is tightened the internal diameter decreases while the outside diameter increases. This change in diameters creates the clamping force. There are two main advantages of cone clamps. The first is that for machining your component (i. e. a sprocket),